PR-112S-A Seco-Larm Stand-Alone Proximity Reader

Features:

• Stand-alone Proximity Card Reader
• Use in small businesses, homes, gates/parking structures, apartments and other locations
• Sealed and weatherproof (IP67)
• Mounts easily to interior and exterior walls
• Attractive tri-color wave shaped LEDs status bar indicates proximity reader's mode and status: Blue - On/Valid Card Indicator, Green - Programming Mode, Red - Invalid Card
• Output relay for either time (1 to 180 seconds) or "Toggle" mode
• Egress input to exit the protected area without using the proximity reader.
• Buzzer is programmable for audible confirmation or silent mode
• Up to 100 user cards can be programmed

The ENFORCER Stand-Alone Proximity Reader provides a flexible solution for controlled access. The stylish case and small size make it ideal for use in offices, homes and apartments. The wave-shaped tri-color LED status bar accents the case design. Simple installation, quick programming, and high reliability are combined in the PR-112S-A Stand-Alone Proximity Reader.

Specifications

• Power Input - 12VDC
• Current Draw
  • Standby - 80mA @ 12VDC
  • Active - 200mA @ 12VDC
• Max. Read Distance - 6" (15cm)
• User Card Limit - 100 cards
• Master Card Limit - 5 Cards
• Transmit Frequency - 125Khz
• Outputs - 1 Relay (Com, N.O., N.C.)
• Contact Rating - 1A @ 30V
• Relay Time Delay - 1~180 secs. / Toggle Mode
• Temperature - -4o~158oF (-20o~70oC)
• Enclosure Rating - IP67
• Dimensions - 311/ " x 13/ " x 5/ " (95 x 44 x 17 mm) 16 4 8

PR-112S-A Datasheet

PR-112S-A Manual