E-922CPQ Seco-Larm 3 Channel Voice Dialer Listen-in with Built-in Relay

Features:

• Trigger activated dialer with user programmable message (12-second basic + 6-second message for the triggered input)
• LCD display indicates ready or alarm (input and number dialed)
• 1 Inhibit and 3 trigger inputs, each programmable high (input >3.5V) or low (input <1V)
• Listen in, stop the dialing process, and/or turn the auxiliary output on or off during dialer call out
• Call in any time to listen in and/or turn auxiliary output on or off
• Remote control auxiliary relay – open doors/gates by phone
• 6 Programmable emergency phone numbers (14 digits each)
• Built-in flash memory to protect against system data loss
• Tone or pulse dialing

When triggered by an alarm system, the ENFORCER Voice Dialer calls up to 6 numbers to deliver an 18-second message reporting the zone which triggered the alarm. It calls each number up to 3 times and repeats the message twice. The receiver can listen in and trigger or turn off the auxiliary relay.

Specifications

• Operating voltage - 10~18 VDC
• Current draw - 50mA @ 12VDC standby, 200mA @ 12VDC dialing
• Phone system - For single-line or VOIP phone systems
• Connectors - Inputs: Terminal block, Telephony: Terminal block
• Inputs (max. 15V) - 3 Trigger and 1 inhibit, NO/NC, programmable high (input >3.5V) or low (<1V)
• Auxiliary relay output - 2A @ 24VDC, NO/NC, programmable 1~255 sec
• Emergency message length - 12s + 6s message per input (user recorded)
• Emergency phone numbers - 6 numbers, up to 14 digits for each number
• Programmable dial attempts - 3 times for each number
• Message repeat - 1~2 times for each number (customizable)
• Operating temperature - 32°~140°F
• Dimensions - 4 1/16" x5 9/16" x 1 11/16"

E-922CPQ Datasheet