IPV-P188Q Seco-Larm PoE Surge Protector Protects a PoE Camera from Surges of Electricity

Features:

• Helps prevent damage to sensitive networking equipment
• Intercepts repeated surges and spikes that could damage network equipment
• Installs on a Cat5e/6 4-pair UTP cable with RJ45 jacks
• Power and signal line protection
• 10/100 Base-T Cat5/5e compatible
• Support mid-span PoE and end-span PoE
• Complies with 802.3af and 802.3at for PoE
• Includes a 16" grounding wire for convenient connection to ground

The ENFORCER PoE Surge Protector is a passive device that helps protect sensitive networking equipment from power surges. The device can be used in new or existing installations. The IPV-P188Q should be installed between the PoE hub and a networked device to protect against surges that could damage the equipment.

Specifications

• Bandwidth - Up to 68MHz
• Maximum input - 58Vp-p
• Insertion loss - <0.2dB
• Return loss - 16dB@100Ω
• Frequency response - Up to 3dB@68MHz
• Insulation resistance - 10,000MΩ
• Maximum surge voltage - Up to 4 kV
• Discharging current - 400A
• Surge life - 30000 surges@4 kV
• Surge protection time - 1ns
• Surge resistance - 0Ω
• Signal passing capability
  • Breakdown voltage - 58V
  • Clamping voltage - 77V
• Power passing capability - 45W
• Connector
  • In - RJ45
  • Out - RJ45
• Impedance - 42Ω
• Dimensions - 3½"x1"x1" (88x26x25 mm)
• Weight - 2.8-oz (80g
• Material - Aluminum
• Operating temperature - -40°~185° F (-40°~85° C)

IPV-P188Q Datasheet

IPV-P188Q Manual