KT-MOD-IO16 Kantech KT-1 and KT-400 Compatible RS-485 Input / Output Module

Features:

• Provides cost-effective expansion of input and output capacity
• Small, modular size requires minimal panel space
• Sixteen (16) terminals for use as inputs/ outputs or elevator control
• Sixteen (16) LED indicators offering visual status of each terminal enable quick diagnostics and troubleshooting
• Total of 256 inputs and 256 outputs per KT controller
• Dedicated tamper input included on each module
• Reduces length of sensor and control wiring
• Compatible with KT-1 and KT-400 door controllers

The Kantech RS-485 Input/Output Module provides a flexible, cost-effective means to expand the input and output functionality of any KT-1 or KT-400 door controller. Featuring 16 terminals for use as inputs and outputs (configurable in lots of 4), this single unit module eliminates the need to have additional lines of input/ output modules linked to a system.

Specifications

• Dimensions (H x W x D) - 31.5 x 146 x 82.6 mm (1.25 x 5.75 x 3.25 in)
• Weight - 118 g (0.25 lb)
• Operating Temperature - 2° to 40°C (35° to 104°F)
• Operating Humidity - 0 to 95% non-condensing
• Input Voltage - 9.5 VDC to 15 VDC
• Current Consumption
  • Typical - 500 mA @ 12 VDC (25 mA per terminal)
  • Max - 1.6 A @ 12 VDC (45 mA per terminal)
• RS-485 LED Indicators - 2 LEDs for the RS-485 communication (RX, TX)
• Vital LED Indicator - Module status
• Inputs/ Outputs - 16 Inputs/ Outputs (configurable in lots of 4)
• Inputs - Inputs/ Outputs that are configured as inputs support normally closed (NC) and normally open (NO) contacts. They support no end-of-line, single end-of-line and double end-of- line zone loops.
• Outputs - Inputs/ Outputs that are configured as outputs (open-drain outputs) can sink up to 750 mA each
• Input/ Output LED Indicators - 16 LEDs for the Input/ Output status
• Aux Power Outputs - 4 terminals wired together to supply up to 1.5 A out of the input power. Outputs are supervised and current limited.
• SPI Port - Inputs/ Outputs #9 to #12 that are configured as SPI ports can support a daisy-chained SPI bus that is made up of 8 KT-MOD-REL8 modules. Each of these modules can provide 8 Form C relay outputs
• Terminal Blocks - Removable type, color coded, supports 12-30 AWG wires
• Tamper - NC Input (NEOL)
• Mounting - PCB in a compatible cabinet (KT-MOD-CAB recommended)
• Communication - RS-485 AES-128
• RS-485 Cabling - 2 twisted pairs, unshielded, up to 1200 m (4000 ft)
• Input Wiring - Up to 600 m (2000 ft)
• Firmware - Field upgradable via RS-485. To verify the firmware version of the KT-MOD-IO16, refer to the relevant software user manual
• Certifications - FCC, CE, RoHS, WEEE
• Connections per Controller - Up to 62 modules per KT door controller using RS-485 COM2
• Warranty - Limited lifetime

KT-MOD-IO16 Specifications PDF

KT-MOD-IO16 Manual