Features: ETL certified for UL 639 Wireless connectivity for easy installation Configurable PIR sensitivity including pet immunity Resolution: 320x240 (QVGA) Color camera Night vision w/IR illumination Black and white Receive email or MMS alerts with...

Features: Meets new UL217 8th edition and UL268 7th edition requirements Designed to recognize smoke from some synthetic materials Monitors and reports on excessive temperature variations Optical smoke detection chamber for improved smoke detection Rate...

Features: Notification to panel when knob on stove/grill is turned at least 20 degrees from the default "off" position Remote e-mail/text notification (enabled through Alarm.com account) Water resistant: Weather sealed sensor disk adheres to grill...

Features: Compatible with LTE Network Antenna installs in attic above panel 10-foot coax cable Plugs into GC2 cell radio module IP-65 Connector Type: MMCX Plug Antenna Dimensions: 195mm x 39mm Operating Temperatures: -20C ~ +65C Better signal strength,...

Features: Powered by SecureNet SmartLink+ app 802.11 b/g/n WiFi H.264 video compression 720p High Definition resolution Two-way audio (most models) IR-Cut Filter and IR LEDS for Night Vision Specifications Video Resolution - 720p (1280 x 720, 640 x...

Features: Sends a notification if water is detected where it doesn’t belong Easy installation, No screws or tools needed 2GIG and Honeywell 345MHz compatible Dimensions: 2.4" diameter, 1.3" thickness Transmission Range: 350 ft open-air with Wireless...

Features: 3G cellular telephone module Works with AT&T Network Compatible with SecureNet Canada and select countries of the Caribbean GC2 Requires FW v1.17.0.3 or newer Includes 2GIG-ANT3X antenna

Features: Monitors any UL existing smoke detector Does not impact UL or Fire Marshall approval of existing smoke detectors 100% compatible with 2GIG panels and Honeywell 5800 receivers FCC, IC, and ETL listed in US and Canada to UL985 standard...

Features: Tilt Sensor with 345 MHz transmitter for use with 2GIG GC2 panels with firmware 1.14 and higher Battery powered design (typical battery life is 5 to 8 years) Non-encrypted sensor compatible with GC2, GC2e, GC3, GC3e, and Edge Two 5/8″...

Features: Antenna installs in control panel or in wall behind panel 10-inch cable Plugs into the cell radio module Locking connector Works with GC2 pane

Features: Dual element sensor with 50' by 50' range 45 lb. pet immune 90 degree look down Transmits 345 MHz ETL Listed Non-encrypted sensor compatible with GC2, GC2e, GC3, GC3e, and Edge Includes (1) CR2032 Lithium Battery

Features: Antenna installs in attic above panel 10-foot cable Plugs into cell radio module Locking connector Works with GC2 and GC3 panels Does not work with LTE radios