1000065 Potter RBVS Universal Ball Valve Switch

Features:

• Model Number: RBVS
• Item Number: 1000065
• Fits most lever/tee type ball valves up to 2"
• Fits most backflow preventers up to 2"
• Operates on open or closed valves
• Includes mounting hardware to supervise coils on most solenoids
• Accommodates up to 12 AWG wire
• Optional field installed cover tamper switch kit (0090224)
• RoHS compliant
• Assembled in USA

The Model RBVS is designed to monitor the fully open or closed position of a ball valve installed in a sprinkler system as well as monitor the position of a coil on a solenoid for a preaction/deluge system. The unit will fit on most ball valves installed on back-flow-preventers and alarm trim lines of dry, alarm, and deluge sprinkler valves. The switch operates if the ball valve handle is moved from the normal position. However, the switch does not track the position of the handle or ball. When the ball valve handle is under the RBVS plunger, a spring-loaded actuator will contact the valve handle. When the handle is moved from the position, this actuator extends to the tripped position, and the RBVS contacts change state, thereby opening or closing a circuit.

The unit also includes a small “L” bracket and “V” clamp to allow the RBVS to mount directly to the nipple on the coil of a solenoid valve. The plunger of the RBVS is actuated by the stud protruding through the center of the coil, see Fig. 6. If a technician removes the coil from the solenoid for testing, the RBVS will activate.
A cover tamper switch is available and is activated by the removal of the RBVS housing cover. If an attempt is made to remove the RBVS by the removal of the mounting brackets, the unit will be set into the tripped mode by this action.

The RBVS can be mounted to the hex portion of the ball valve or backflow-preventer or to the adjoining pipe via two clamps. The RBVS is shipped with three sets of mounting kits to accommodate various pipe and valve sizes, refer to Table 1. An “L” shaped and offset bracket for mounting the switch enclosure and an extension bracket add to the mounting flexibility of the RBVS. See “Typical Mounting Diagrams” and “Installations and Operation” on following pages.

1000065 Datasheet