Specifications   Plastic spacer molded in red, used to create extra depth for terminal block assembly. Comes with two mounting screws.

Large Clear Conduit Spacer for 3/4" rigid conduit, includes one STI-3002 weather gasket, one STI-3004, Rigid Conduit Gasket, an anchor packet and is for weather applications.

Clear conduit spacer Adds two inches of depth to the patented Stopper II and Weather Stopper products Has conduit knockouts on the bottom and top with filler pieces to fill conduit cutouts when no exposed conduit to mount over 8.5 in H x 5.5 in W x 2 in...

Rigid 3/4" conduit gasket to be placed around exposed conduit to help keep weather out of the surface mounted pull stations and push buttons. For use with Stopper models.

Gasket to be placed around exposed 1/2" conduit to help keep weather out of surface mounted pull stations and push buttons. For use with Stopper models.

Square neoprene gasket used to help make Stopper covers weather resistant. Included in STI-1250 and STI-3150 models.

Polycarbonate backplate recommended for use on unstable or uneven surfaces and weather applications. To be used with Stopper models.

Provides additional ventilation for the STI-3100 Conduit Spacer and Weather Stopper products Provides additional ventilation and drainage of any collected moisture

Specifications N.C. reed switch and magnet for STI-SA5000 series

Features: UB-1 custom message plate Maximum of two lines, twelve letters (including spaces) UB-1CL-Y Datasheet

Features: UB-1 custom message plate Maximum of two lines, twelve letters (including spaces) UB-1CL-W Datasheet

Features: UB-1 custom message plate Maximum of two lines, twelve letters (including spaces) UB-1CL-G Datasheet

Features: UB-1 custom message plate Maximum of two lines, twelve letters (including spaces) UB-1CL-B Datasheet

Replacement contact holder for 0, 1, 3 and 4 switch

Features:Listed to UL 294.Latching and/or timing module.Allows a momentary button to be used in a latching mode that can be reset with a contact closure.Compact size (1.” H x 1.75" W x .65" D) will fit inside a handi box behind a flush mounted...

Two extra keys for Stopper Station #0 switch Keys for Stopper Station models with Push-to-Activate, Key-to-Reset octagonal button type

Two extra keys for Stopper Station Key-to-Activate (#3) switch

Two extra keys for Stopper Station Key-to-Reset (#2) switch

Features: Yellow, 1.5 inch deep backbox for use with Stopper Station button/switch activation type 0, 3, or 4 switch Back box is for surface mount applications Also available in red, green, white or blue

N.C. contact For 0, 1, 3 or 4 Stopper Station push button switch