Features: Model Number: IRON KIT Item Number: 1119176 The test may be utilized to monitor the effectiveness of corrosion mitigation programs and to keep track of general corrosion within a fire sprinkler system. Ferrous iron is oxidized to ferric iron,...

Model Number: CPRTK-2Item Number: 90177The CPRTK contains necessary components to remove, replace, and forward for analysis, the test coupons and water sample from a Potter Corrosion Monitoring Station. Specifications Turn the two 1" ball valves (PCMS)...

Model Number: CRTK-4Item Number: 90174Turn the two 1" ball valves (PCMS) or butterfly valve (PCMS-LP) to the closed position to isolate the coupon rack from the fire sprinkler system. Verify that the 1/2" drain valve is closed Remove the 1/2" drain plug...

Model Number: CRTK-2 Item Number: 90173 Kit Includes: Two C1010 Mild Steel Corrosion Coupons (One for CRTRTK-2) Two CDA360 Brass Corrosion Coupons (One for CRTRTK-2) Corrosion Coupon Insertion Instructions #5401142 Corrosion Coupon Insertion...

Model Number: PIPE SAMPLE Item Number: 1119184 Includes: Sample Identification Form, U.S. Prepaid Shipping, Laboratory Analysis of Returned Pipe Sample This test is designed to conform to the requirements of NFPA 25, 2002, 13.2.1.2 requiring testing...

Model Number: PIPE FAIL Item Number: 1119183 Includes: U.S. Prepaid Sample Shipping, Sample Identification Form, Laboratory Analysis of Returned Pipe Samples This analysis is available for identification of the corrosion/ failure mechanism, i.e...

Model Number: PCMS-RM Item Number: 1119546 Potter corrosion monitoring station-riser mount for wet or dry pipe sprinkler systems The Model PCMS-RM, is a Corrosion Monitoring Station-Riser Mount consisting of a coupon rack that is installed on fi re...

Model Number: PCMPK-1 Item Number: 90180 The PCMPK consists of the necessary corrosion monitoring probes and pressure switches that, when added to the Potter Corrosion Monitoring Station, provides notifi cation to the fi re/sprinkler administrator...

Model Number: WTK Item Number: 1119178 Kit Includes: 120 cc Sample Bottle. Instruction sheet, Prepaid Shipping Label, Pre-Printed Return Mailing Label, Laboratory Analysis of Returned Water Sample (1 each) This kit is designed to conform to the...

Model Number: SLUDGE KIT Item Number: 1119174 This kit is designed to conform to the requirements of NFPA 25, 2002, 13.2.1.2 requiring testing for MIC if slime or tubercles are discovered in an internal inspection. The test involves removing some of...

Model Number: BAC PAK Item Number: 1119172 Test Kit Includes: Bac-Pak Foil Pack with Three Microbiological Test Vials Labeled APB, SRB, and IRB, Vial Holder, 120cc Bottle for Obtaining Sample (1 each) The BAC-PAK is a test kit designed to allow field...